Datasheet - Welding wires/rods for Nickel alloys
| Typical composition in % | |
|---|---|
| Ni | ≥ 93 |
| Fe | ≤ 0,7 |
| C | ≤ 0,05 |
| Mn | 0,8 |
| Si | ≤ 0,8 |
| Cu | ≤ 0,2 |
| Ti | ≤ 4,0 |
| Al | ≤ 1,0 |
| S | ≤ 0,01 |
| Classification | |
|---|---|
| EN ISO 18274 | S Ni 2061 (NiTi3) |
| DIN 1736 | SG - NiTi4 |
| Material No. | 2.4155 |
| AWS A 5.14 | ER Ni-1 |
| BS 2901 | NA 32 |
| Application |
|---|
| Massive wire electrode suitable for welding pure nickel and nickel alloys as well as joints between these materials and steel, cast steel, copper claddings and buffer layers. |
| Base materials | ||
|---|---|---|
| 2.4056 | 2.4062 | 2.4066 |
| Nickel 200 | Nickel 201 | Nickel 99 |
| Physical properties (Approx. values) at 20° C | |
|---|---|
| Tensile strength Rm [MPa] | 550 |
| Yield strength Rp0,2 [MPa] | 250 |
| Elongation A200 [%] | 35 |
| Hardness [HV] | 135 |
| Specific electr. Resistance [ Ohm mm²/m] | 0,29 |
| Density [g/cm³] | 8,7 |
| Melting point [° C] | 1.430 |
| Shielding gas |
|---|
| MIG: Ar+1-3% O2, Ar+1-3% CO2, Ar+He+O2, Ar+He+CO2, Ar+He+CO2+H2 |
| WIG: Ar, He, Ar+He, Ar+2-5% H2 |
| Polarity |
|---|
| MIG =+, TIG =- |
| Welding position |
|---|
| PA, PB, PC, PD, PE, PF |
| Dimensions | |
|---|---|
| MIG-wires [mm] | 1,0; 1,2; 1,6 |
| TIG-rods [mm] | 1,6; 2,0; 2,4 |
Packaging
| Spools | Packaging units |
|---|---|
| BS 300 / 15 kg | 25 spools = 375 kg (Pallet) |
Rods
TIG-rods are packed in boxes of 5 kg. The length is 1.000 mm.
Thats not all